today we’re taking a look at a motorized sit-stand desk…Locktec Flexispot Livermore… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very easy to put together, and it took my 11-year-old child and I (I mostly just monitored) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Check out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being functional, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also useful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how tough the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this suggested it was going to be strong) and likewise a little hesitant (since all of us understand how much of an obstacle assembling furniture can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the streamlined look of this desk. I’m positive any of the many varied finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as often times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I attempted to get as near that as I might on uplifts site with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation but as you must understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had bought this I ‘d have been on the phone with client service right away they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely absolutely where any sort of cable management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my prepare for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their website as well which also feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering numerous alternatives and devices I could however I think I’m better that they just sent a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a bunch of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Locktec Flexispot Livermore
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the money it’s gon na require to enter a greater end maker like uplift desk or extremely desk and I have not personally utilized extremely desk products so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters got here damaged however from a consumer perspective you ‘d most likely be truly thrilled to get this in