today we’re taking a look at a motorized sit-stand desk…Flexispot Turn Off Alarm… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Examine out the video below of it operating while there’s an individual lying down on it if you do not believe me.
The electric raise/lower feature is not just easy to use and quickly, but it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is likewise practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are even more inexpensive than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (since this implied it was going to be tough) and likewise a little hesitant (because all of us understand how much of a challenge assembling furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the sleek appearance of this desk. I’m confident any of the many varied surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as many times as you want throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I could on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you need to know by now does not affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get doing not have even any cable grommets for go through the outside carton
for the desktop was not harmed in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had purchased this I ‘d have been on the phone with customer service right away they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated as well to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however more affordable does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my plan for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best feels like a less expensive imitation of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their website too which likewise feels eerily comparable to among their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering numerous options and devices I might however I think I’m better that they just sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of bonus is the move when the core item isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Turn Off Alarm
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity however I would invest the extra money it’s gon na take to get into a greater end maker like uplift desk or very desk and I haven’t personally utilized very desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged but from a client perspective you ‘d probably be truly excited to get this in