today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Installation… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really simple to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s very durable and can hold a great deal of weight. If you do not believe me, have a look at the video listed below of it running while there’s a person lying down on it.
The electrical raise/lower feature is not just easy to use and quickly, however it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without providing it much idea.
On top of being functional, it also looks fantastic in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are much more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (since this meant it was going to be tough) and likewise a little hesitant (since we all know just how much of a challenge assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I like the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as lot of times as you want throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near to that as I might on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you must know by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is utterly strange due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough guy if I had actually acquired this I ‘d have been on the phone with customer care right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor double stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged too my plan for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best seems like a less expensive replica of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various alternatives and accessories I might but I believe I’m better that they only sent out a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of additionals is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk Installation
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and productivity however I would spend the additional money it’s gon na require to enter into a greater end maker like uplift desk or very desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their credibility is very good big thanks to flexi area for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged but from a customer perspective you ‘d most likely be actually thrilled to get this in