Find Flexispot Standing Desk 48 X Height Adjustable Desk 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk 48 X Height Adjustable Desk… you might have seen my review on the uplift desk, if not …

In general, I should state I like the Flexispot E7.

here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.

It’s very simple to put together, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.

The electric raise/lower feature is not only easy to use and quick, but it’s also remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is likewise practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are even more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:

The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both fired up (given that this suggested it was going to be tough) and likewise a little hesitant (since all of us know just how much of an obstacle assembling furnishings can be).

Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.

Once assembled, I enjoy the sleek look of this desk. I’m positive any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.

The peaceful operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as lot of times as you desire throughout the day.

This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.

 

because video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as near that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you ought to understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable television grommets for go through the outside carton

for the desktop was not damaged in any way which is utterly bizarre since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just incredibly rough man if I had purchased this I ‘d have been on the phone with client service immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually definitely where any kind of cable management materials whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double stage dual motor and a three-stage dual motor which presses the expense of the desk up

an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed also my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at finest feels like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our valuable time covering various choices and accessories I might but I believe I’m happier that they only sent out a standard desk since as a standard desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of extras is the move when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk 48 X Height Adjustable Desk

in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity but I would spend the additional money it’s gon na require to enter into a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their reputation is very good big thanks to flexi area for sending this out for review unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a customer viewpoint you ‘d most likely be truly delighted to get this in

Published