today we’re taking a look at a motorized sit-stand desk…Flexispot Mr2… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a great deal of weight. If you don’t believe me, check out the video listed below of it running while there’s a person lying down on it.
The electrical raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are much more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t necessarily a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable television tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this indicated it was going to be tough) and also a little hesitant (since we all know just how much of a difficulty putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I like the streamlined appearance of this desk. I’m positive any of the many varied surfaces that it is available in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near that as I could on uplifts website with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you should understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is utterly unusual since I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply extremely rough man if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function strangely definitely where any type of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed as well my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website also which likewise feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering numerous options and accessories I might but I think I’m happier that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of additionals is the move when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Mr2
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity but I would invest the additional money it’s gon na require to enter into a higher end producer like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it but their credibility is excellent big thanks to flexi area for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged but from a client perspective you ‘d probably be actually delighted to get this in