today we’re having a look at a motorized sit-stand desk…Flexispot Height Adjustable Standing Desk With Riser… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s super tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you don’t believe me.
The electrical raise/lower function is not only easy to use and quickly, but it’s likewise remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how tough the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this implied it was going to be durable) and likewise a little hesitant (because we all understand how much of a difficulty assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I love the sleek appearance of this desk. I’m positive any of the many diverse finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you should understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is absolutely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough male if I had purchased this I ‘d have been on the phone with client service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual phase dual motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their website as well which also feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering various options and accessories I could however I think I’m better that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of extras is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Height Adjustable Standing Desk With Riser
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the additional money it’s gon na require to get into a higher end producer like uplift desk or extremely desk and I have not personally used very desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged however from a client perspective you ‘d probably be really delighted to get this in