today we’re having a look at a motorized sit-stand desk…Flexispot Glass Adjustable Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. Examine out the video below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and fast, but it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being functional, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a substantial fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply an effect of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this indicated it was going to be strong) and also a little reluctant (because we all know just how much of a challenge assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many varied finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as lot of times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near that as I might on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation but as you should understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is absolutely strange since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough male if I had bought this I ‘d have been on the phone with customer service immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a price would be the one advantage I would offer this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% cheaper even if you upgrade this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed also my plan for this desk at this moment is to lose the desk top and included completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their website too which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering different alternatives and accessories I might however I think I’m better that they only sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Glass Adjustable Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance but I would spend the additional money it’s gon na take to enter a higher end producer like uplift desk or very desk and I haven’t personally utilized really desk items so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived damaged however from a customer perspective you ‘d probably be truly excited to get this in