today we’re taking a look at a motorized sit-stand desk…Flexispot Electric Height Adjustable Standing Desk Ec3-ec4… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Check out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and quickly, however it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without offering it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are even more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this meant it was going to be durable) and likewise a little reluctant (due to the fact that we all know how much of a challenge putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I love the sleek appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as sometimes as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or want to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near to that as I could on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get doing not have even any cable grommets for pass through the outdoors container
for the desktop was not damaged in any way which is entirely unusual since I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just super rough man if I had acquired this I ‘d have been on the phone with customer support immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the double stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars cheaper than the uplift but less expensive does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best seems like a cheaper imitation of that it just does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website too which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our precious time covering various alternatives and accessories I could however I think I’m happier that they just sent a standard desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Electric Height Adjustable Standing Desk Ec3-ec4
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity but I would invest the additional money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it but their credibility is very good big thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed however from a consumer viewpoint you ‘d most likely be really thrilled to get this in