Find Flexispot Ec1 55 X 28 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Ec1 55 X 28… you might have seen my evaluation on the uplift desk, if not …

In general, I should state I like the Flexispot E7.

here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.

It’s really easy to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. Inspect out the video listed below of it operating while there’s a person lying down on it if you do not think me.

The electrical raise/lower feature is not just easy to use and quickly, but it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much thought.
On top of being practical, it also looks terrific in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:

The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how strong the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both excited (given that this meant it was going to be strong) and likewise a little reluctant (because we all know just how much of an obstacle assembling furnishings can be).

The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.

Once assembled, I love the streamlined look of this desk. I’m confident any of the many diverse finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.

The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.

Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.

 

in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as close to that as I might on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for pass through the outdoors carton

for the desktop was not harmed in any way which is entirely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had actually purchased this I ‘d have been on the phone with customer support instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any type of cable management products whatsoever the frame on this unit is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up

an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come basic with the control board that permits up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive does not suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up harmed as well my prepare for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furniture that will last you this at best feels like a cheaper replica of that it simply does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to take a look at their site too which also feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering different alternatives and accessories I might but I think I’m better that they just sent out a standard desk since as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a lot of extras is the relocation when the core product isn’t what it must be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Ec1 55 X 28

in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and performance however I would spend the extra money it’s gon na require to enter a higher end manufacturer like uplift desk or extremely desk and I haven’t personally used very desk products so I can’t speak on it but their credibility is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a customer perspective you ‘d probably be actually excited to get this in

Published