Find Flexispot Ea2 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Ea2… you may have seen my review on the uplift desk, if not …

In general, I should say I like the Flexispot E7.

here are plenty of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.

It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly just monitored) under an hour from start to finish.
It’s super durable and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.

The electric raise/lower feature is not only easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much thought.
On top of being functional, it also looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also useful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a substantial fan of:

The package that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The practical cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both thrilled (given that this suggested it was going to be sturdy) and likewise a little reluctant (due to the fact that all of us understand just how much of a challenge putting together furnishings can be).

Luckily, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the directions.

Once put together, I like the smooth look of this desk. I’m positive any of the many diverse finishes that it can be found in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.

The peaceful operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as many times as you want throughout the day.

Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.

 

because video is quite kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as close to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you need to understand by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for pass through the outside container

for the desktop was not damaged in any way which is utterly unusual since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had actually purchased this I ‘d have been on the phone with client service right away they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the double phase double motor and a three-stage dual motor which presses the cost of the desk up

an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this design does come standard with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive does not mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged too my plan for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at best seems like a more affordable replica of that it just does not feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their website as well which likewise feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering numerous alternatives and devices I might but I think I’m happier that they only sent a standard desk due to the fact that as a basic desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a bunch of bonus is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Ea2

in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance however I would spend the additional money it’s gon na require to enter a higher end producer like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for review unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a customer standpoint you ‘d probably be truly thrilled to get this in

Published