today we’re taking a look at a motorized sit-stand desk…Flexispot E7 Loc… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to put together, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. Examine out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and quickly, but it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (given that this implied it was going to be durable) and also a little hesitant (because all of us understand just how much of a challenge putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I love the smooth look of this desk. I’m confident any of the many diverse surfaces that it comes in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch in between sitting and standing as sometimes as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is utterly strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had purchased this I ‘d have been on the phone with customer support right away they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely absolutely where any type of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control panel that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however cheaper does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged also my plan for this desk at this moment is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at best seems like a more affordable replica of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their site also which also feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering numerous choices and accessories I could however I think I’m happier that they just sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of bonus is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot E7 Loc
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity however I would invest the additional money it’s gon na take to get into a greater end maker like uplift desk or very desk and I have not personally used really desk products so I can’t speak on it but their track record is great big thanks to flexi area for sending this out for evaluation sadly I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters got here harmed however from a client viewpoint you ‘d probably be truly excited to get this in