today we’re taking a look at a motorized sit-stand desk…Flexispot E2 Standing Desk Frame White… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. If you don’t think me, take a look at the video below of it running while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and fast, however it’s likewise remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more budget friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable television tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (because this indicated it was going to be durable) and likewise a little reluctant (because all of us understand how much of an obstacle assembling furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once assembled, I like the sleek look of this desk. I’m confident any of the many diverse finishes that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as many times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I could on uplifts site with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you should understand by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for pass through the outdoors carton
for the desktop was not harmed in any way which is entirely bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had actually purchased this I ‘d have been on the phone with customer service immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift model over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my plan for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at best seems like a less expensive imitation of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site also which likewise feels strangely similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering different choices and devices I could however I believe I’m happier that they only sent out a basic desk because as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t believe slapping on a lot of extras is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot E2 Standing Desk Frame White
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and performance however I would invest the extra money it’s gon na require to enter a higher end manufacturer like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it however their track record is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a client standpoint you ‘d most likely be really excited to get this in