Find Flexispot E1S R5528N 2022

today we’re having a look at a motorized sit-stand desk…Flexispot E1S R5528N… you may have seen my evaluation on the uplift desk, if not …

In general, I should state I like the Flexispot E7.

here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.

It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. Inspect out the video below of it operating while there’s a person lying down on it if you don’t believe me.

The electrical raise/lower function is not only easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much thought.
On top of being practical, it likewise looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t always a big fan of:

The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it showed up and I saw how heavy it was, I was both ecstatic (given that this implied it was going to be sturdy) and likewise a little hesitant (due to the fact that we all know just how much of a difficulty putting together furnishings can be).

The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.

When put together, I like the streamlined appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.

The quiet operation and height memory settings make it simple, effective, and peaceful to change between sitting and standing as lot of times as you desire throughout the day.

Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.

 

in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I could on uplifts website with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you ought to understand by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for travel through the outside container

for the desktop was not damaged in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had bought this I ‘d have been on the phone with client service right away they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function oddly definitely where any type of cable television management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage double motor which pushes the expense of the desk up

an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one benefit I would offer this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is absolutely frustrating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my plan for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their site too which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering various options and devices I could but I think I’m better that they only sent a fundamental desk because as a standard desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a bunch of bonus is the relocation when the core product isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot E1S R5528N

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and efficiency but I would spend the extra money it’s gon na require to enter a greater end manufacturer like uplift desk or really desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their credibility is excellent big thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged however from a customer standpoint you ‘d most likely be truly delighted to get this in

Published