today we’re having a look at a motorized sit-stand desk…Flexispot Bike Chair… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. If you don’t think me, take a look at the video listed below of it operating while there’s a person lying down on it.
The electrical raise/lower feature is not just easy to use and quickly, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being functional, it likewise looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (because this indicated it was going to be durable) and likewise a little hesitant (since we all know how much of a challenge assembling furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I love the sleek look of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as lot of times as you desire throughout the day.
Lastly, this desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as close to that as I might on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you should understand by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not harmed in any way which is utterly strange due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer support instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift but less expensive doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my plan for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to have a look at their site as well which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering numerous alternatives and accessories I could however I think I’m happier that they just sent a fundamental desk because as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of bonus is the relocation when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Bike Chair
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and productivity but I would invest the extra money it’s gon na require to enter into a higher end manufacturer like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it however their credibility is very good huge thanks to flexi area for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged but from a customer standpoint you ‘d probably be actually delighted to get this in