today we’re taking a look at a motorized sit-stand desk…Flexispot Adjustable Standing Desk Pro Series… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really positive.
It’s really easy to assemble, and it took my 11-year-old child and I (I primarily simply monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. If you do not think me, have a look at the video below of it running while there’s an individual resting on it.
The electric raise/lower function is not only easy to use and quick, but it’s also remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without offering it much thought.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more economical than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a huge fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both ecstatic (given that this implied it was going to be tough) and likewise a little hesitant (due to the fact that we all know how much of an obstacle putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the sleek appearance of this desk. I’m positive any of the many varied surfaces that it comes in would look terrific in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as sometimes as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near to that as I might on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you should know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is entirely unusual since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough guy if I had actually purchased this I ‘d have been on the phone with customer service right away they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this system is a single motor double phase style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the double stage double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you upgrade this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged too my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furniture that will last you this at finest feels like a more affordable imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their website as well which also feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering various options and devices I might however I believe I’m happier that they only sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of bonus is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Adjustable Standing Desk Pro Series
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity however I would invest the extra money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally used extremely desk items so I can’t speak on it but their credibility is great huge thanks to flexi area for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a consumer perspective you ‘d most likely be really delighted to get this in