today we’re taking a look at a motorized sit-stand desk…Flexispot 60 X 30… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. Examine out the video listed below of it running while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and quick, but it’s also surprisingly smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t necessarily a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a repercussion of how sturdy the Flexispot is.
The practical cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (given that this suggested it was going to be strong) and likewise a little hesitant (because we all know just how much of a challenge putting together furnishings can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When assembled, I love the smooth look of this desk. I’m positive any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as often times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near to that as I might on uplifts site with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review however as you ought to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for go through the outside carton
for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough guy if I had actually acquired this I ‘d have been on the phone with customer service immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper does not mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal motion at this rate point it’s unacceptable it’s add insult to injury here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my plan for this desk at this moment is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at finest seems like a less expensive imitation of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their site also which likewise feels eerily comparable to among their rivals there’s a wealth of devices you can get for the flexi area desk as much as and including a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering numerous options and accessories I might but I think I’m better that they just sent out a basic desk since as a basic desk I’m not a fan of the quality assurance at this price point and I don’t think slapping on a lot of extras is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot 60 X 30
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the additional money it’s gon na require to enter a greater end maker like uplift desk or very desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their track record is very good huge thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters got here harmed but from a consumer perspective you ‘d probably be actually delighted to get this in